Hardwood Floor Refinishing in NJ

Hardwood takes a beating in the busiest parts of a house. The hallway, the kitchen, the path from the back door to the fridge. Over time you start to notice scratches, gray worn patches, and a finish that’s lost its shine. The good news? The wood underneath is usually fine. RC&R Designer Flooring has worked as hardwood refinishing contractors in New Jersey since 1997, and we bring worn floors back to looking their best.

When to Refinish Your Hardwood Floors

Try this quick test. Put a few drops of water on a worn spot. If the water soaks in fast and darkens the wood, the finish has worn through and it’s time. Other signs to look for:

  • Scratches and scuffs you can feel with your fingertips
  • Dents and small gouges
  • A cloudy, dull look across the whole room
  • Faded or grayed patches where people walk most

Sanding and Refinishing Hardwood Floors

Sanding and refinishing hardwood floors means taking the surface back to bare wood. That removes most scratches along with the old, tired finish. Then comes the fun part. With the wood bare, you can keep the natural color or choose a new stain, anything from pale blond to deep walnut. We suggest looking at stain samples on your own boards before you commit. Solid hardwood can usually be sanded several times in its life. Engineered floors depend on how thick the top layer is, and we check that before we start.

Dust-Minimizing Floor Refinishing

For most people, the dust is the worry. Fair enough. Old-school sanding could coat an entire house. Our dust-minimizing floor refinishing uses modern equipment and methods designed to keep dust and dirt contained.

  • Far less dust. The rest of your home isn’t left under a layer of sawdust.
  • Less downtime. You’re back on your floors sooner.
  • You can stay home. No need to book a hotel.
  • Low-odor finishes. We use low-odor stains and polyurethane.

Why Choose Our Hardwood Refinishing Contractors?

We’ve been doing this since 1997. We explain each step before we begin, we’re straight with you about what refinishing can and can’t fix, and we work to keep the disruption small. Every job starts with an in-home consultation and a plan that fits your budget.

Book Your Floor Refinishing Consultation in NJ

Floors looking tired? Call RC&R Designer Flooring at (973) 975-5446 and we’ll come and take a look.

Bare_wood
Hardwood_floors
Aging_wood_floors

Floor Refinishing FAQs

Look for deep scratches, dull or gray patches, and spots where water soaks straight in instead of beading on the surface. If you’re not sure, we can assess the floor during an in-home visit.

Yes. Once the floor is sanded back to bare wood, you can pick a completely new color before the finish goes on.

Yes. Our process is set up so you can stay put, with low-odor stains and finishes and methods that keep dust down. You’ll just need to keep off the rooms we’re working in.

Sanding always creates some dust. Our equipment is designed to capture most of it, so there’s far less mess than people expect.

Solid hardwood can usually be sanded and refinished several times. With engineered hardwood, it depends on the thickness of the top wear layer. Some can be refinished once or twice, and some not at all.

Call RC&R Designer Flooring at (973) 975-5446. We set up in-home visits Monday through Saturday.